Trailers

JUMBO 27.47 - PLATFORM

JUMBO 35.43 - AL-ELOX SIDE WALLS 350 mm

JUMBO 30.43 - AL-ELOX SIDE WALLS 350 mm

JUMBO 27.43 - AL-ELOX SIDE WALLS 350 mm

JUMBO 35.43 - PLATFORM

JUMBO 30.43 - PLATFORM

JUMBO 27.43 - PLATFORM

JUMBO

A double-axle or triple-axle versatile trailer with excellent driving characteristics. These trailers are most frequently produced in a platform or flat platform version. The trailer is hydraulically tiltable with the use of a manual pump; optionally, tilting with the use of an electric hydraulic set can be offered. The trailer floor is made of water-resistant plywood, the frame is assembled of welded, hot-dip galvanized parts. In the standard version, the trailers are delivered with a 600 mm rear tilting access ramp; in the flat platform version with a railing - profiled barrier around the loading surface, and also with a bracing bar and blocking chocks, a support wheel, six anchoring lugs. In the platform version, the trailer is equipped with 350 mm aluminium side plates that can be simply removed and the trailer can be used as a flat platform. For the trailers, tarpaulins are available with a welded frame with the height of 170 and 200 mm from the floor.

KONOS 35 - 3

KONOS 35 - 2

KONOS

KONOS is a universal container lift offered by VEZEKO in cooperation with CHARVÁT CTS. The stretching of the container is independent, controlled by an electro-hydraulic pump with a remote wireless controller. The KONOS trailer is produced in two versions, a shorter one with two axles and a longer one with three axles. The frame of the stretching mechanism is fully welded with surface treatment - painted in RAL 7015. In addition to standard stretching, the container can be folded back after locking. The variety of containers can be chosen by the customer according to his own needs. The offer includes standard tub and flatbed containers, but it is possible to offer containers as well as cabinets.

JUKI 35.4

JUKI 30.4

JUKI 27.4

JUKI 35.3

JUKI 30.3

JUKI 27.3

JUKI

TRIP E 35.40

TRIP E 30.40

TRIP E 27.40

TRIP D 35.35

TRIP D 30.35

TRIP D 27.35

TRIP C 35.30

TRIP C 30.30

TRIP C 27.30

TRIP

Robust single-axle or double-axle trailers, always braked, with wheels under the loading surface. The trailers can be tilted to three sides with the use of a manual hydraulic pump; on request, the trailer can also be equipped with an electric hydraulic set. The side plates are removable and made of anodized aluminium profiles; the rear face plate is tiltable in a combined way. The floor is made of 3 mm galvanized metal sheets. The trailers can be fitted with a wire mesh structure, aluminium ramps, or extended side plates. The standard equipment of all the types contains a support wheel, supporting jack legs, eight anchoring lugs, and blocking plastic chocks. After a minor adaptation, the trailers can be connected to a tractor, to use its hydraulic circuit for tilting.

KA 1300R

KA 1500R

KA 2700R

KA 750R TANDEM

KA-R

Single-axle or double-axle trailers, always braked, with wheels under the loading surface, which is accessible from all sides. The trailer is tiltable backwards with the use of a manual hydraulic pump; on request, the trailer can also be equipped with an electric hydraulic set. Removable side plates are made of low-weight anodized aluminium profiles. The floor is made of water-resistant anti-slip plywood. The wide range of accessories comprises a wire mesh structure, extended side plates, and tarpaulins with a frame. As standard the trailers are equipped with a support wheel, four anchoring lugs, blocking plastic chocks, and supports of the front face plate.

IMOLA S 35.47-3

IMOLA S 35.47-2

IMOLA S 30.43

IMOLA S 30.39

IMOLA S 27.43

IMOLA S 27.39

IMOLA S

Two-axle car transporter foldable using hydraulic cylinders. On the floor there are two running tracks made of profiled galvanized sheet metal, the other parts of the frame are steel with a hot-dip galvanizing surface treatment. The trailer includes fixed ramps with a length of 677 mm. By folding the trailer, an approach angle of 11.5° is achieved with 195/55 R 10 wheels (IMOLA S 27.xx) and 13° with 195/50 R 13C wheels (IMOLA S 35.47). The trailer is equipped as standard with a spreader bar, hand winch, support wheel and spare wheel. The central filling of the floor can be solved with waterproof plywood.

IMOLA 35.47-3

IMOLA 35.47-2

IMOLA 30.43

IMOLA 30.39

IMOLA 27.43

IMOLA 27.39

IMOLA

A double-axle car transporter tiltable with the use of hydraulic cylinders. The trailer floor is made of sectional aluminium profiles, the other parts of the frame are metallic with hot-dip galvanized surface finish. The trailer comprises fixed access ramps with the length of 677 mm. By tilting the trailer you will achieve the access angle of 11.5° with 195/55 R 10 wheels (Imola 27.xx) and 13° with 195/50 R13C wheels (Imola 35.47). The trailer is equipped with a bracing bar, a support wheel as standard.

HUSKY FB K D 30.40/19