MONACO 35.48 KZ

MONACO 35.48 KZ is a braked two-axle car transporter with a 4880 × 2100 mm loading platform and a gross vehicle weight of 3500 kg. With an unladen weight of 825 kg, it offers a payload capacity of 2675 kg, providing ample space and weight reserve for larger and heavier vehicles. On the KZ version, the wheels are recessed into the loading platform, allowing the deck height to be reduced to 560 mm. The robust fully welded hot-dip galvanized frame is complemented by a vehicle securing system, perforated side strips and two loading ramps. The trailer is certified in accordance with VDI 2700 for the safe securing of the transported vehicle. Standard equipment includes 4 VDI 2700 wheel stops for securing the vehicle on the loading platform, and the corresponding certificate is supplied with the trailer.

MONACO 35.48 KV

MONACO 35.48 KV is a braked two-axle car transporter with an extended 4880 × 2100 mm loading platform and a gross vehicle weight of 3500 kg. With an unladen weight of 725 kg, it offers a high payload capacity of 2775 kg and is particularly suitable for transporting larger and heavier passenger cars and for demanding professional use. The KV version has the wheels positioned alongside the loading platform. This configuration enables a particularly low deck and a favourable loading angle, making it easier to load vehicles with low ground clearance. The robust fully welded hot-dip galvanized frame is complemented by lashing points, perforated strips along the sides of the loading platform and two separate loading ramps. The trailer is certified in accordance with VDI 2700 for the safe securing of the transported vehicle. It is equipped with 4 VDI 2700 wheel stops for securing the vehicle on the loading platform, and the corresponding certificate is included.

MONACO 35.48 KP

MONACO 35.48 KP is a braked two-axle car transporter with an extended 4880 × 2100 mm loading platform and a gross vehicle weight of 3500 kg. With an unladen weight of 835 kg, it provides a payload capacity of 2665 kg and is particularly suitable for transporting larger and heavier passenger cars. The KP version has the wheels positioned beneath the loading platform, providing a continuous deck that can be used across its entire surface. The loading platform height is 660 mm. The robust fully welded hot-dip galvanized frame, vehicle securing system and two loading ramps are designed for demanding professional use. The trailer is certified in accordance with VDI 2700 for the safe securing of the transported vehicle. Standard equipment includes 4 VDI 2700 wheel stops for securing the vehicle on the loading platform, and the corresponding certificate is supplied with the trailer.

MONACO 30.43 KZ

MONACO 30.43 KZ is a braked two-axle car transporter with a 4330 × 2100 mm loading platform and a gross vehicle weight of 3000 kg. With an unladen weight of 740 kg, it offers a payload capacity of 2260 kg, making it suitable for transporting heavier passenger cars as well. On the KZ version, the wheels are recessed into the loading platform, allowing a low deck height to be combined with compact trailer dimensions. The robust fully welded hot-dip galvanized frame is complemented by lashing points, perforated strips along the sides of the loading platform and two separate loading ramps. The trailer is certified in accordance with VDI 2700 for the safe securing of the transported vehicle. It is equipped with 4 VDI 2700 wheel stops for securing the vehicle on the loading platform, and the corresponding certificate is included.

MONACO 30.43 KV

MONACO 30.43 KV is a braked two-axle car transporter with a 4330 × 2100 mm loading platform and a gross vehicle weight of 3000 kg. With an unladen weight of 725 kg, it provides a payload capacity of 2275 kg, making it suitable for heavier passenger vehicles. The KV version has the wheels positioned alongside the loading platform, allowing the deck to be lowered to just 520 mm. The low loading platform provides a favourable loading angle and makes loading cars with low ground clearance easier. The construction consists of a durable fully welded hot-dip galvanized frame, a vehicle securing system and two loading ramps. The trailer is certified in accordance with VDI 2700. Standard equipment includes 4 VDI 2700 wheel chocks and the corresponding certificate.

MONACO 27.43 KV

MONACO 27.43 KV is a braked two-axle car transporter with a 4330 × 2100 mm loading platform, a gross vehicle weight of 2700 kg and a payload capacity of 1975 kg. It is particularly suitable where easy loading of vehicles with low ground clearance is important. The KV version has the wheels positioned alongside the loading platform. This configuration allows the deck height to be reduced to just 520 mm, providing a very favourable loading angle. The robust hot-dip galvanized construction is complemented by a vehicle securing system and two separate loading ramps. The trailer is certified in accordance with VDI 2700 for the safe securing of the transported vehicle. Standard equipment includes 4 VDI 2700 wheel stops for securing the vehicle on the loading platform, and the corresponding certificate is supplied with the trailer.

MONACO 30.43 KP

MONACO 30.43 KV is a braked two-axle car transporter with a 4330 × 2100 mm loading platform and a gross vehicle weight of 3000 kg. With an unladen weight of 725 kg, it provides a payload capacity of 2275 kg, making it suitable for heavier passenger vehicles. The KV version has the wheels positioned alongside the loading platform, allowing the deck to be lowered to just 520 mm. The low loading platform provides a favourable loading angle and makes loading cars with low ground clearance easier. The robust fully welded hot-dip galvanized frame is complemented by a vehicle securing system and two separate loading ramps. The trailer is certified in accordance with VDI 2700 for the safe securing of the transported vehicle. Standard equipment includes 4 VDI 2700 wheel stops for securing the vehicle on the loading platform, and the corresponding certificate is supplied with the trailer.

MONACO 27.43 KP

MONACO 27.43 KP is a braked two-axle car transporter with a 4300 × 2100 mm loading platform and a gross vehicle weight of 2700 kg. With an unladen weight of 725 kg, it provides a payload capacity of 1975 kg and is suitable for transporting a wide range of passenger cars. The KP version has the wheels positioned beneath the loading platform, creating a continuous and easily usable deck. The loading platform height is 640 mm. The fully welded hot-dip galvanized frame is complemented by lashing points, perforated side strips and two separate loading ramps. The trailer is certified in accordance with VDI 2700 for the safe securing of the transported vehicle. Standard equipment includes 4 VDI 2700 wheel stops for securing the vehicle on the loading platform, and the corresponding certificate is supplied with the trailer.

FALKE C 35.40-3

FALKE C 35.40-3 is a braked three-axle machinery transporter suitable for carrying heavier construction and earthmoving equipment with dimensions of up to 3990 × 1750 mm. With a payload capacity of 2730 kg, it is suitable for demanding professional use where a high weight reserve, ample space for the transported equipment and a three-axle configuration with improved weight distribution are required. The strong monolithic welded construction, hot-dip galvanized frame and floor made of waterproof anti-slip plywood are designed for demanding professional use. The transported equipment can be safely secured using recessed rubber-coated lashing eyes integrated in the frame. The welded ramps are easy to fold down, width-adjustable according to the machine track width and can also be opened sideways, for example when loading a pallet.

FALKE C 35.40-2

FALKE C 35.40-2 is a braked two-axle machinery transporter suitable for carrying heavier construction and earthmoving equipment with dimensions of up to 3990 × 1750 mm. With a payload capacity of 2800 kg, it represents the highest weight version in the two-axle configuration of this size and is suitable wherever a high weight reserve is required together with ample space for the transported equipment. The strong monolithic welded construction, hot-dip galvanized frame and floor made of waterproof anti-slip plywood are designed for demanding professional use. The transported equipment can be safely secured using recessed rubber-coated lashing eyes integrated in the frame. The welded ramps are easy to fold down, width-adjustable according to the machine track width and can also be opened sideways, for example when loading a pallet.

FALKE C 30.40-3

FALKE C 30.40-3 is a braked three-axle machinery transporter suitable for carrying construction and earthmoving equipment with dimensions of up to 3990 × 1750 mm. With a payload capacity of 2285 kg, it is suitable for larger machines and work equipment where, in addition to a higher weight reserve, a three-axle configuration with improved weight distribution is also important. The robust monolithic welded construction, hot-dip galvanized frame and waterproof anti-slip floor ensure high durability in everyday use. Recessed rubber-coated lashing eyes allow the transported machine to be firmly and safely secured. The fold-down welded ramps can be adjusted according to the track width of the equipment and can also be opened sideways for easier material handling.

FALKE C 30.40-2

FALKE C 30.40-2 is a braked two-axle machinery transporter suitable for carrying construction and earthmoving equipment with dimensions of up to 3990 × 1750 mm. With a payload capacity of 2365 kg, it offers a higher weight reserve than the 27.40-2 version and is therefore suitable for heavier, larger machines or equipment with a higher operating weight. The robust monolithic welded construction, hot-dip galvanized frame and waterproof anti-slip floor ensure high durability in everyday use. Recessed rubber-coated lashing eyes allow the transported machine to be firmly and safely secured. The fold-down welded ramps can be adjusted according to the track width of the equipment and can also be opened sideways for easier material handling.

FALKE C 27.40-3

FALKE C 27.40-3 is a braked three-axle machinery transporter suitable for carrying construction and earthmoving equipment with dimensions of up to 3990 × 1750 mm. With a payload capacity of 2005 kg, it is suitable for larger work machines and equipment where a three-axle configuration with improved weight distribution is required while maintaining a gross vehicle weight of 2700 kg. The trailer is based on a robust monolithic welded construction with a hot-dip galvanized frame and a floor made of waterproof anti-slip plywood. Recessed rubber-coated lashing eyes in the frame provide secure fastening of the transported equipment. The welded ramps are easy to fold down, width-adjustable according to the machine track width and can also be opened sideways, for example when loading a pallet.

FALKE C 27.40-2

FALKE C 27.40-2 is a braked two-axle machinery transporter suitable for carrying construction and earthmoving equipment with dimensions of up to 3990 × 1750 mm. With a payload capacity of 2080 kg, it is suitable for larger work machines, equipment and accessories where more space for the transported machine is important while maintaining a gross vehicle weight of 2700 kg. The trailer is based on a robust monolithic welded construction with a hot-dip galvanized frame and a floor made of waterproof anti-slip plywood. Recessed rubber-coated lashing eyes in the frame provide secure fastening of the transported equipment. The welded ramps are easy to fold down, width-adjustable according to the machine track width and can also be opened sideways, for example when loading a pallet.

FALKE B 35.30

FALKE B 35.30 is a braked machinery transporter suitable for carrying heavier construction and earthmoving equipment with dimensions of up to 2980 × 1540 mm. With a payload capacity of 2835 kg, it represents the highest weight version in this size and is suitable wherever a high weight reserve is required together with more space for the transported equipment. The strong monolithic welded construction, hot-dip galvanized frame and floor made of waterproof anti-slip plywood are designed for demanding professional use. The transported equipment can be safely secured using recessed rubber-coated lashing eyes integrated in the frame. The welded ramps are easy to fold down, width-adjustable according to the machine track width and can also be opened sideways, for example when loading a pallet.

FALKE B 30.30

FALKE B 30.30 is a braked machinery transporter suitable for carrying construction and earthmoving equipment with dimensions of up to 2980 × 1540 mm. With a payload capacity of 2390 kg, it offers a higher weight reserve than the 27.30 version and is therefore suitable for heavier compact machines or equipment with a higher operating weight where more space for safe loading is also required. The robust monolithic welded construction, hot-dip galvanized frame and waterproof anti-slip floor ensure high durability in everyday use. Recessed rubber-coated lashing eyes allow the transported machine to be firmly and safely secured. The fold-down welded ramps can be adjusted according to the track width of the equipment and can also be opened sideways for easier material handling.

FALKE B 27.30

FALKE B 27.30 is a braked machinery transporter suitable for carrying construction equipment with dimensions of up to 2980 × 1540 mm. With a payload capacity of 2110 kg, it is suitable for compact machines, work equipment and accessories where more space for the transported equipment is required while maintaining easy trailer handling and sufficient weight reserve for everyday use. The trailer is based on a robust monolithic welded construction with a hot-dip galvanized frame and a floor made of waterproof anti-slip plywood. Recessed rubber-coated lashing eyes in the frame provide secure fastening of the transported equipment. The welded ramps are easy to fold down, width-adjustable according to the machine track width and can also be opened sideways, for example when loading a pallet.

FALKE A 35.25

FALKE A 35.25 is a braked machinery transporter suitable for carrying smaller but heavier construction and earthmoving equipment with dimensions of up to 2490 × 1340 mm. With a payload capacity of 2880 kg, it represents the highest weight version in this size and is suitable wherever a high weight reserve is required while maintaining compact trailer dimensions. The strong monolithic welded construction, hot-dip galvanized frame and floor made of waterproof anti-slip plywood are designed for demanding professional use. The transported equipment can be safely secured using recessed rubber-coated lashing eyes integrated in the frame. The welded ramps are easy to fold down, width-adjustable according to the machine track width and can also be opened sideways, for example when loading a pallet.

FALKE A 30.25

FALKE A 30.25 is a braked machinery transporter suitable for carrying smaller construction and earthmoving equipment with dimensions of up to 2490 × 1340 mm. With a payload capacity of 2440 kg, it offers a higher weight reserve than the 27.25 version and is therefore suitable for heavier compact machines or equipment with a higher operating weight. The robust monolithic welded construction, hot-dip galvanized frame and waterproof anti-slip floor ensure high durability in everyday use. Recessed rubber-coated lashing eyes allow the transported machine to be firmly and safely secured. The fold-down welded ramps can be adjusted according to the track width of the equipment and can also be opened sideways for easier material handling.

FALKE A 27.25

FALKE A 27.25 is a braked machinery transporter suitable for carrying smaller construction equipment with dimensions of up to 2490 × 1340 mm. With a payload capacity of 2160 kg, it is suitable for compact machines, work equipment and accessories where easy trailer handling and sufficient weight reserve for everyday use are important. The trailer is based on a robust monolithic welded construction with a hot-dip galvanized frame and a floor made of waterproof anti-slip plywood. Recessed rubber-coated lashing eyes in the frame provide secure fastening of the transported equipment. The welded ramps are easy to fold down, width-adjustable according to the machine track width and can also be opened sideways, for example when loading a pallet.

VARIO B 27.3 - AL-ELOX SIDE WALLS

VARIO B 27.2 - AL-ELOX SIDE WALLS

VARIO B 13.3 - AL-ELOX SIDE WALLS

VARIO B 13.2

VARIO A 27.3 - AL-ELOX SIDE WALLS

VARIO A 27.2 - AL-ELOX SIDE WALLS

VARIO A 13.3

VARIO A 13.2 - AL-ELOX SIDE WALLS

VARIO A 13.1 - AL-ELOX SIDE WALLS

MONACO 27.43 KZ

MONACO 27.43 KZ is a braked two-axle car transporter with a 4330 × 2100 mm loading platform, a gross vehicle weight of 2700 kg and a payload capacity of 1975 kg. It provides a versatile solution for both everyday and professional vehicle transportation. On the KZ version, the wheels are recessed into the loading platform. This design allows the deck height to be reduced to 540 mm while maintaining compact trailer dimensions. The fully welded hot-dip galvanized frame is complemented by a vehicle securing system and two separate loading ramps. The trailer is certified in accordance with VDI 2700 for the safe securing of the transported vehicle. Standard equipment includes 4 VDI 2700 wheel stops for securing the vehicle on the loading platform, and the corresponding certificate is supplied with the trailer.

JUKI 35.4

JUKI 30.4

JUKI 27.4

JUKI 35.3

JUKI 30.3

JUKI 27.3

TRIP E 35.40

TRIP E 30.40

TRIP E 27.40

TRIP D 35.35

TRIP D 30.35

TRIP D 27.35

TRIP C 35.30

TRIP C 30.30

TRIP C 27.30

MOBI 4200

CARGO LIGHT DX 27.26

CRAFT 13 HOBBY